FIBARO Flood Sensor assists you for a better house control.
FIBARO - Smart Module FGS-214
SMART MODULE is designed for on/off remotely controlling electrical devices (door locks, door openers, etc). The output contact is voltage free (dry contact) giving the possibility to use different power supply loads.
Powered up using:
110 - 240 [V] AC with maximum current: 6.5 [A] (resistive load) => 1560 [W]
24 - 30 [V] DC with maximum current: 6.5 [A] (resistive load) => 156 [W]
It can control motors that have direction controlled by only one wire.
Frequently used at: Heating systems on/off control, Gates and garage doors, conventional incandescent lights.
Our engineers will offer you the best solutions for your projects
Refunds are processed within 1-2 days
Using latest standards in security policies
- Power supply must be:
100 - 240 VAC and requires NEUTRAL Wire (NUL);
24 - 30 VDC
- A Z-Wave Hub is required!
- Designed to be installed in standard wall switch boxes or anywhere else it is necessary to control electric devices. Allows us to control the connected devices either via Z-Wave or via mechanical switch.
- It can control 1 circuit with loads that doesn't exceed 1560 W (VAC) or 156 W (VDC).
- Do not connect loads greater than those recommended!
- Do not connect types of load other than resistive or incandescent!
How it works
Smart Module is a small size module created by Fibaro, that can be integrated in standard wall switch boxes. It allows us to remotely control connected devices using the Z-Wave Network (a Z-Wave Hub is required).
Notes for the diagrams:
S1 - terminal for 1st switch;
S2 - terminal for 2nd switch;
L - terminal for Live wire (100 - 240 VAC) or - (for VDC);
IN - terminal for Live wire (100 - 240 VAC) or - (for VDC);
Q - output terminal;
N - terminal for Neutral wire (for AC) or + (for VDC);
B - service button (used to add/remove the device from the Z-Wave network).
Where it works
It can be fit into standard wall switch boxes or anywhere else it is necessary to control electric devices.
110 - 240 VAC. ~ 50/60Hz
24 - 30 VDC
6.5 A on channel (Q) - resistive or incandescent loads
|External 6 A circuit breaker required|
|micro-gap relay switch μ|
|0 - 35 °C|
|868.42 MHz Z-Wave Plus (500 series)|
Dimensions (L x W x H) [mm]
|42.5 x 38.25 x 20.3|
- up to 50 m outdoors
- up to 30 m indoors
depending on terrain and building materials
- Z-Wave Plus