There are 6 products.
QUBINO - Flush 1D Relay (1*2.3 kW)
ZMNHND1 is designed for on/off remotely controlling electrical devices (door locks, door openers, etc). The output contact is voltage free (dry contact) giving the possibility to use different power supply loads. An optional temperature sensor (ZMNHEA1) can be connected.
Powered up using 110 - 240 [V] AC with maximum current: 10 [A] (resistive load) => 2300 [W]
24 - 30 [V] DC with maximum current: 10 [A] (resistive load) => 240 [W]
It can control motors that have direction controlled by only one wire.
Frequently used for: Heating systems on/off control, Gates and garage doors, conventional incandescent and halogen lights, LED bulbs.
QUBINO - Flush Shutter DC 12-24 V
ZMNHOD1 is designed to control roller blinds, venetian blinds, gates or garage doors that are controlled with a DC motor, each direction having its own command wire.
Powered up at 12 - 24 [V] DC with a maximum current: 2 [A] (resistive loads)
QUBINO - RGB/RGBW Dimmer
RGB/RGBW Dimmer is designed to control LED, RGB, RGBW strips. Works for 12 - 24 [V] DC powered devices with a total power up to 150 - 300 [W]
QUBINO - Z-Wave+ Flush module Dimmer ZMNHDD1
ZMNHDD1 DIMMER is designed to dim compatible light sources. ! NEUTRAL WIRE NEEDED
Powered using 110 - 240 [V] AC with a maximum current: 0.6 [A] (resistive load) => 140 [W]
24 - 30 [V] DC with a maximum current: 0.85 [A] (resistive load) => 21 [W]
Works with: Dimable lights.
Doesn't work with: Fluorescent tube lamps.
Occasional bulb flickering might be resolved using a BYPASS.