EVERSPRING In-wall dimmer module Z-Wave Plus

NANO DIMMER is designed to dim compatible light sources or just on/off control other types of lights. It can work without a neutral wire for loads that require a maximum power of 250 [W].

Works with: LED, Dimmable LED, CFL, Halogen.

Doesn't work with: fluorescent tube lamps.

Occasional bulb flickering might be resolved using an AEOTEC BYPASS.

DIMMER 2 is designed to dim compatible light sources. It can work without a neutral wire for loads that require a maximum power up to 250 [W].

Works with: IKEA Tradfri (on/off only), Dimable lights.

Doesn't work with: Fluorescent tube lamps.

Occasional bulb flickering might be resolved using a FIBARO BYPASS.

RGBW CONTROLLER 2 uses PWM (Pulse Width Modulation), allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. Works for 12 - 24 [V] DC powered devices with a total power up to 144 - 288 [W]

SINGLE RELAY SWITCH is designed to control 1 circuit that has a total power up to 2400 [W]. (resistive loads = loads consisting of any heating element)

Examples: incandescent lights, toasters, ovens, coffee makers.

SINGLE SWITCH 2 is designed to control 1 circuit that has a total power up to 1400 [W]. (resistive loads = loads consisting of any heating element)

Examples: incandescent lights, toasters, ovens, coffee makers.

DOUBLE SWITCH 2 is designed to control up to 2 distinct circuits (2 different wall switches) that have a total power up to 2300 [W].

Examples: incandescent lights, toasters, ovens, coffee makers.

ZMNHCD1 is designed to control roller blinds, venetian blinds, gates or garage doors that are controlled with an AC motor, each direction having its own command wire.

Powered up at 110 - 240 [V] AC with a maximum current: 4 [A] (resistive load)

ZMNHND1 is designed for on/off remotely controlling electrical devices (door locks, door openers, etc). The output contact is voltage free (dry contact) giving the possibility to use different power supply loads. An optional temperature sensor (ZMNHEA1) can be connected.

Powered up using 110 - 240 [V] AC with maximum current: 10 [A] (resistive load) => 2300 [W]

                            24 - 30 [V] DC with maximum current: 10 [A] (resistive load) => 240 [W]

It can control motors that have direction controlled by only one wire.

Frequently used for: Heating systems on/off control, Gates and garage doors, conventional incandescent and halogen lights, LED bulbs.

ZMNHOD1 is designed to control roller blinds, venetian blinds, gates or garage doors that are controlled with a DC motor, each direction having its own command wire.

Powered up at 12 - 24 [V] DC with a maximum current: 2 [A] (resistive loads)