Important notes

- Power supply must be 100 - 240 VAC and requires NEUTRAL Wire (NUL);

- A Z-Wave Hub is required!

- Designed to be installed in standard wall switch boxes or anywhere else it is necessary to control electric devices. Allows us to control the connected devices either via Z-Wave or via mechanical switch.

- It can control 2 different circuits with loads that doesn't exceed 1500 W on each channel (total up to 2300W when both channels are active).

- Do not connect loads greater than those recommended!

- Do not connect types of load other than resistive or incandescent!

How it works

Double Relay Switch is a small size module created by Fibaro, that can be integrated in standard wall switch boxes. It allows us to remotely control connected devices using the Z-Wave Network (a Z-Wave Hub is required).

Notes for the diagrams:

S1 - terminal for 1st switch;

S2 - terminal for 2nd switch;

Q2 - output terminal of the 2nd channel;

Q1 - output terminal of the 1st channel;

IN - input terminal for load power supply

L - terminal for Live wire (100 - 240 VAC);

N - terminal for Neutral wire;

B - service button (used to add/remove the device from the Z-Wave network)

Where it works

It can be fit into standard wall switch boxes or anywhere else it is necessary to control electric devices.

Tech Specs