FIBARO - Smart Module FGS-214

lei249.99
Tax included Shipping excluded

SMART MODULE is designed for on/off remotely controlling electrical devices (door locks, door openers, etc). The output contact is voltage free (dry contact) giving the possibility to use different power supply loads. 

Powered up using:

110 - 240 [V] AC with maximum current: 6.5 [A] (resistive load) => 1560 [W]

24 - 30 [V] DC with maximum current: 6.5 [A] (resistive load) => 156 [W]

It can control motors that have direction controlled by only one wire.

Frequently used at: Heating systems on/off control, Gates and garage doors, conventional incandescent lights.

Quantity
Last items in stock

  • Free project design for every client
    Free project design for every client
  • Returns accepted for maximum 30 days
    Returns accepted for maximum 30 days
  • Free support by phone and online
    Free support by phone and online

Important notes

Power supply must be:

100 - 240 VAC and requires NEUTRAL Wire (NUL);

OR

24 - 30 VDC

- A Z-Wave Hub is required!

- Designed to be installed in standard wall switch boxes or anywhere else it is necessary to control electric devices. Allows us to control the connected devices either via Z-Wave or via mechanical switch.

- It can control 1 circuit with loads that doesn't exceed 1560 W (VAC) or 156 W (VDC).

- Do not connect loads greater than those recommended!

- Do not connect types of load other than resistive or incandescent!

How it works

Smart Module is a small size module created by Fibaro, that can be integrated in standard wall switch boxes. It allows us to remotely control connected devices using the Z-Wave Network (a Z-Wave Hub is required).

Notes for the diagrams:

S1 - terminal for 1st switch;

S2 - terminal for 2nd switch;

L - terminal for Live wire (100 - 240 VAC) or  - (for VDC);

IN - terminal for Live wire (100 - 240 VAC) or  - (for VDC);

Q - output terminal;

N - terminal for Neutral wire (for AC) or + (for VDC);

B - service button (used to add/remove the device from the Z-Wave network).

Where it works

It can be fit into standard wall switch boxes or anywhere else it is necessary to control electric devices.

Tech Specs

Power supply

110 - 240 VAC. ~ 50/60Hz

24 - 30 VDC

Current

6.5 A on channel (Q) - resistive or incandescent loads

Overcurrent protection

External 6 A circuit breaker required

Active element

micro-gap relay switch μ

Operating temperature

0 - 35 °C

Technology

868.42 MHz Z-Wave Plus (500 series)

Dimensions (L x W x H) [mm]

42.5 x 38.25 x 20.3
Range

- up to 50 m outdoors

- up to 30 m indoors

depending on terrain and building materials

Security

AES-128 Encryption



Fibaro
FGS-214
2 Items

Data sheet

Technology
Z-Wave Plus

Specific References

You might also like

chat Comments (0)
No customer reviews for the moment.