• -lei41.99

FIBARO - RGBW Controller 2

lei299.99
lei258.00 Save 41.99
Tax included Shipping excluded

RGBW CONTROLLER 2 uses PWM (Pulse Width Modulation), allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. Works for 12 - 24 [V] DC powered devices with a total power up to 144 - 288 [W]

Quantity
Last items in stock

  • Free project design for every client
    Free project design for every client
  • Returns accepted for maximum 30 days
    Returns accepted for maximum 30 days
  • Free support by phone and online
    Free support by phone and online

Important notes

- 12 - 24 VDC Power supply needed!

- A Z-Wave Hub is required!

- Designed to be installed in standard wall switch boxes or anywhere else it is necessary to control electric devices. Allows us to control the connected devices either via Z-Wave or via mechanical switch.

- It can control loads that doesn't exceed 144 W (12VDC power supplied) or 288 W (24VDC power supplied).

- Do not connect loads greater than those recommended!

- Do not connect types of load other than RBG/RGBW LED strips, one-color LED strips or halogen lights!

How it works

RGBW Controller 2 is a small size module created by Fibaro, that can be integrated in standard wall switch boxes. It allows us to remotely control connected devices using the Z-Wave Network (a Z-Wave Hub is required).

Notes for the diagrams:

P - 12/24 VDC power supply connector;

GND - ground connector;

IN1 - input connector for controlling OUT1 (R) output;

IN2 - input connector for controlling OUT2 (G) output;

IN3 - input connector for controlling OUT3 (B) output;

IN4 - input connector for controlling OUT4 (W) output;

OUT1 - output connector controlled by IN1 input (red LED color recommended);

OUT2 - output connector controlled by IN2 input (green LED color recommended);

OUT3 - output connector controlled by IN3 input (blue LED color recommended);

OUT4 - output connector controlled by IN4 input (white LED color recommended);

B - service button (used to add/remove the device from the Z-Wave network).

Where it works

It can be fit into standard wall switch boxes or anywhere else it is necessary to control electric devices.

Tech Specs

Power supply

12 - 24 VDC 

Current

max 5A on each channel

max 12A for all outputs

Operating temperature

0 - 40 °C

Technology

Z-Wave Plus

Dimensions (L x W x H) [mm]

42.35 x 36.9 x 17.5
Range

- up to 50m outdoors

- up to 40m indoors

depending on terrain and building materials

Security

AES-128 Encryption

Inputs

4 inputs, 0-10V or binary

Outputs

4 outputs, PWM (244Hz PWM frequency)

Fibaro
FIBEFGRGBW-442
1 Item

Data sheet

Technology
Z-Wave Plus

Specific References

You might also like

FIBARO - CO Sensor

FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector. It can be placed on a wall.

Features: CO sensor, Temperature sensor, LED diode and a built-in alarm siren.

Regular price lei499.99 Price lei428.00
In stock

FIBARO - Dimmer 2

DIMMER 2 is designed to dim compatible light sources. It can work without a neutral wire for loads that require a maximum power up to 250 [W].

Works with: IKEA Tradfri (on/off only), Dimable lights.

Doesn't work with: Fluorescent tube lamps.

Occasional bulb flickering might be resolved using a FIBARO BYPASS.

Regular price lei299.99 Price lei258.00
In stock
chat Comments (0)
No customer reviews for the moment.